21
4.6 I Replacing the brushes
Are the brushes worn?
•
Replace the brushes if the wear indicators are similar to example
:
Remove the worn brushes
•
When the cleaner is not placed on the base, remove the tabs from the holes in which they are fastened, then remove
the brushes.
Position the new brushes.
•
Fit the side without tabs under the brush holder (see figure )
.
•
Roll the brush around its support, slide the tabs into the attachment holes
and pull on the end of each tab
until its
edge passes through the slit (see figure )
.
•
Cut the tabs using a pair of scissors for them to be level with the other blades (see figure )
.
EN