13
2.5.2 Starting the cleaning cycle
•
Slide the cursor on the rear of the cleaner to the right to start the cycle.
•
The indicator
blinks while waiting for the cleaner to be immersed.
Tip: To improve cleaning performance
•
At the start of the bathing season, run several cleaning cycles in floor only mode (after removing the
large debris with a net). Regular use of the cleaner (without exceeding 3 cycles per week) means that your
pool will always be clean and the filter less clogged. We recommend running a few cycles without the
debris filter to perform a rough clean, see "4.2 I Cleaning the filter" to disassemble the filters.
2.5.3 Immersing the cleaner
•
Place the cleaner vertically into the water and hold it there while moving it slightly in all directions so that the air
contained in it escapes.
•
Let the cleaner sink to the bottom of the pool. The cycle will start at the latest 40 seconds after the cleaner detects
that it is in water. The cleaner adapts its movement strategy to the cleaning mode, in order to optimise its level of
coverage.
EN
