8
❷ General use
2.1 I Assembling the charging station
Assemble the charging station before use:
•
Slide the top of the foot (marked with a blue dot) into the slot at the front of the charging station (also marked with
a blue dot) ( ).
•
Push the foot fully home under the station (the bottom of the foot ( ) should clip in).
•
Attach the hook on the side of the charging station (on the right or the left to match the desired location)
( ).
•
Roll out the cable to run it to the rear of the station or on one side, depending on the desired installation (a slot to
hold the cable is provided inside each foot).
Click
Cable location
EN
