14
2.6 I Removing the cleaner from the water
•
Using the pole, you can remove the cleaner during the cycle and the cleaner will stop automatically
once it is out of the water.
•
At the end of a cycle, the cleaner always stops at the foot of a side.
2.6.1 Without the iAquaLink™ app
•
During the last ten minutes of the cycle, the cleaner will successively climb the various sides and wait at the waterline
until it is recovered using the handle (
) (not available in the "Floor only" mode).
•
If it is not retrieved at this time, the cleaner at the foot of a side at the end of the cycle ( ).
•
Attach the hook (supplied) to the end of a pool pole (not supplied) ( ).
•
Catch the cleaner handle with the hook and raise the cleaner to the surface (
).
•
Use the handle to take it out of the water. The cleaner expels water through a rear jet to make it lighter (
)
.
EN
