20
4.5 I Cleaning the propeller
To avoid serious injury:
• Wear gloves when maintaining the propeller
.
• Always dry the appliance before cleaning the propeller and clean the propeller in a dry area.
• Ensure cleaner is in the OFF mode before attempting maintenance (see the first step below).
• Be careful to force the appliance to stop before cleaning the propeller: Check that the cleaner is completely off by
moving the cursor : no indicator should light up.
•
Open the filter access hatch by pressing on the lock (see figure ).
•
Remove the filter (see figure ).
•
Unscrew the flow guide by hand (see figure ). When it is first removed, it may be necessary to loosen it with a
screwdriver (see figure ).
•
Remove the flow guide by lifting it (see figure ).
•
Put on a pair of gloves and pull the propeller, holding it firmly to take it out (see figures and ).
•
Remove all debris (leaves, stones, etc.) which may be blocking the propeller.
• Once cleaning is finished, put on a pair of gloves and firmly push the propeller back in place, put the
flow guide back in, screwing it in by hand. Refit the filter.
•
Place the cleaner on the charging station to wake it up.
EN
