Zodiac Vortex iQ, Инструкция по установке и эксплуатации

Страница: 8 / 26

7
❸ General use
3.1 I Operati ng principle
The cleaner is separate from the fi ltrati on system and can functi on independently. It simply needs connecti ng to the
mains.
It fi nds the best route to move around and clean the areas of the pool for which it has been designed (depending on the
model: fl oor, walls, water line). Debris is sucked in and stored in the cleaner's fi lter.
The cleaner can be used according to either of the methods below:
- using the remote control included with the cleaner;
- via a smartphone or a tablet compati ble with the iAquaLink™ applicati on (see “❹ Control using the iAquaLink™ app").
3.2 I Pool preparati on
• This product is intended to be used in pools which are permanently installed. Do not use it in
pools which may be dismantled. A permanent pool is built into the ground or on the ground
and cannot be easily dismantled and stored.
• The appliance must operate in pool water with the following properti es:
Water temperature
Between 15°C and 35°C
pH Between 6.8 and 7.6
Free chlorine < 3 mg/ l
• When the pool is dirty, especially when commissioning, remove the largest debris using a net in order to opti mise the
appliance's performances.
• Remove any thermometers, toys and other objects that might damage the appliance.
3.3 I Immersing the cleaner
• Roll out the full length of the cable alongside the pool to avoid the cable becoming tangled during immersion (see
image )
.
• Positi on yourself halfway along the length of the pool before immersing the cleaner (see image ). This will opti mise
the cleaner's movements and reduce tangling in the cable.
• Place the cleaner verti cally into the water (see image ).
• Move it slightly in all directi ons so that the air contained in the cleaner escapes (see image ).
• It is essenti al that the appliance sinks on its own and sett les on the pool fl oor. While it is immersed, the cleaner draws
the length of cable it needs into the pool (see image ).
Recommended entry point
not recommended