14
4.3.2 Start / Stop cleaning and adjust the cleaning ti me
•
When confi guring the cleaner, choosing the pool shape allows you to set up customised cleaning modes.
By default, the cleaning surface is
Floor, Walls and Water Line
.
•
Immerse the cleaner in the pool.
•
In the app's home screen, press
START
.
•
The screen shows the remaining cleaning ti me in hours and minutes.
•
To increase or reduce the cleaning ti me, press
(+)
or
(-)
. These are 30-minute sequences with a minimum of 30
minutes and a maximum of 3 hours 30 minutes.
•
The remaining cleaning ti me displayed in the app is the same as that displayed on the control box.
•
Press
STOP
to end a cleaning cycle.
4.3.3 Confi guring the cleaning program
•
From the app's home screen, select
Cleaning programme
to view the opti ons.
•
Select one of the default set-ups:
Express Cleaning, Intensive Cleaning
or
Water line only.
The mode selected is
highlighted.
• In
Customise
, tap the pictograms to select the opti ons. The opti ons selected will be highlighted.
Surfaces: Floor only / Floor, walls and water line / Water line only
Cleaning intensity: Standard / Intense
•
Press
Save
to save the new setti ngs or
(X)
to cancel.
•
Press
(X)
to return to the home screen.
•
The new cleaning mode will take eff ect for the cleaning cycle in progress and all future cycles.
•
The cleaning cycle ti me may vary depending on the selected setti ngs.
4.3.4 Remote control mode
The cleaner can be controlled using your smartphone or tablet as a remote control.
• Use the remote control mode only if you have the cleaner within view.
•
In the app's home screen, select
Remote control
.
The control box is displayed
.
•
Control the cleaner using
joysti ck mode
or
kineti c mode
(moti on sensors). The mode can be changed at any moment.
• Joysti ck mode:
Press the icons to move the cleaner
forwards and backwards
and to turn
left or right.
• Kineti c mode:
Control the cleaner by ti lti ng the mobile device
upwards
(backwards movement),
downwards
(forward
movement),
to the left
(turn left ),
to the right
(turn right)
.
The fi rst ti me you use it,
kineti c
mode will be automati cally
adjusted/calibrated according to the positi on of your hand. To change it, press the
Re-calibrate
icon at the top left .
•
Press
(X)
to return to the home screen.
•
If the cleaner is relati vely slow to respond to an acti on requested in the app, check the Wi-Fi network
signal, see “4.2 I First-ti me cleaner confi gurati on"
EN
Содержание Vortex iQ
Страница 21: ...20 5 5 I Changing the tyres EN ...
