19
5.4 I Replacing the brushes
•
Each brush is equipped with wear indicators, the diff erence between the indicators and the end of the brush indicates
that the brush is in good conditi on (see image )
.
• When the wear indicators look like those shown in the
image , the brushes are worn and must be replaced.
•
To remove worn brushes, remove the tabs from the holes in which they are fi xed (see image )
.
•
To fi t new brushes, start by fi tti ng the side without tabs under the brush holder (see image )
.
•
Roll the brush around its support, slide the tabs into the att achment holes and pull on the end of each tab unti l its
edge passes through the slit (see image )
.
•
Cut the tabs using a pair of scissors for them to be level with the other blades (see image )
.
Содержание Vortex iQ
Страница 21: ...20 5 5 I Changing the tyres EN ...
