Zodiac SIROCCO 110, Руководство по установке

Страница: 11 / 28

10
Technical specifications
Admissible room temperature °C 0-55
Admissible humidity level % 0-90
Voltage V AC 12
Maximum voltage V AC 24
Protection index IP 20
Dimensions: width / height / depth mm 120 x 70 x 28
Hysteresis
Hymidity % 4
temperature °C 1
Display
Hygro Control display Hygro-thermostat Hygrostat Thermostat
On standby
Active
Starting up and stopping the appliance
Press for 5 seconds.
Locking/unlocking the keyboard
To lock and unlock the keyboard:
- Hygro Control must be active,
- press and simultaneously for 3 seconds,
- the message is displayed or is removed.
By default: display of the temperature and/or desired relative humidity.
Display of the ambient temperature and/or humidity by pressing once,

°C

and/or

%RH

blink. To exit, press , or wait 10 seconds.
*only if your appliance is fitted with the hot water battery option, or extra electric
heating.
- The numbering of the terminals must be respected,
- Do not put these cables into the same duct as other 230 V or 400 V to avoid any
risk of interference of the signals,
- Obstruct the place where the cable emerges from the wall or seal it by using materials
other than silicone and silicone-based materials, in order to avoid any arrival of air
exterior to the room through the duct or dividing wall.
Main supply 12Vac-50Hz- between terminals 4 and 5.
Temperature display*
Relative Humidity
Degree Fahrenheit
Degree Celsius
Requesting
dehumidification
Requesting heating
EN