Zodiac SIROCCO 110, Руководство по установке, Страница: 10 / 28

9
1.3.7.4 Connections
Terminal Sirocco single-phase 230V-1N-50Hz:
Terminal Sirocco 110 three-phase 400V-3N-50HZ:
1.3.7.5 Hygro Control connection
- for installation location: see §1.3.3 and refer to § 1.3.1,
- correctly influenced by the swimming pool room air,
- connect to terminals on the electric box.
Hygro Control = digital display hygro-thermostat = display and setting of pool hall
temperature* and humidity
The appliance must be earthed.
Risk of electrical shock inside the device. Only a qualified and experienced
technician must install the device cables.
If the power cable is damaged it must be replaced by a qualified technician or by a
Zodiac Pool Care Europe service station.
Main supply
(see § 1.3.7.3)
Regulation connection
(see §1.3.7.5)
Contact “normally
open” control of heat source
Main supply 230Vac-50Hz
for circulator
(used with hot water battery, see §1.4.3.2)
or
Main supply
(see § 1.3.7.3)
Regulation
connection
(see §1.3.7.5)
Circulator connection (C-
C) or control of heat
source by contact “NO”
(3-6) (see §1.4.3.2)
Internal connection
terminals (do not modify
the connections)
Cable 5 x 1 mm²,
maximum length:
30 meters
“on/off”
General Sirocco terminal
Temperature* and humidity programming
or hygro-thermostat settings
Value settings