Zodiac SIROCCO 110, Руководство по установке, Страница: 6 / 28

5
1.3.2 Installation requirements
1.3.3 Access to technical compartment
1) install the appliance on a level base, to avoid any overflows from the condensation
tray (adjustment by two hexagonal screws, see figure 1.3.3),
2) easy access to the appliance for maintenance and connections,
3) place nothing in front of or on the blowing and suction grates ,
4) anti-vibration studs (supplied) must be installed under the base when the appliance
is placed on the floor or on a support,
5) for a swimming pool building with a high ceiling or visible roof frame :
- destratification of the upper layers of the room = one or several fans with PVC
blades
or an air extractor with fresh air intake.
Warning! 230 V AC appliances = must be outside volume 1 (see §1.3.1),
6) building requirements: swimming pool building = very damp room
During building make sure that:
- the materials used are compatible with a swimming pool environment,
- the walls are sufficiently waterproofed and insulated to avoid condensation forming in
the room when relative humidity reaches 60 to 70%.
Light structure buildings (verandas, shelters...): there is no risk of deterioration of the
structure, even in case of dew as they are designed to support this (even with a relative
humidity of 70%)
7) risk of stratification:
- height of the room < 4 to 5 meters: mechanical ventilator unit or extractor,
- height of the room > 7 to 8 meters: ceiling fans with large blades,
8) ventilation, renewal of air,
- private pools: highly recommended
- public pools: compulsory
The air can be renewed by:
- a simple mechanical ventilation unit,
- a wall or roof extractor with fresh air intakes.
This ventilation ensures the hygienic renewal of air, the removal of any chloramines
present in the air, and the elimination of excessively hot air, whilst contributing to the
dehumidification of the room.
3
2
Adjusting screw to level the appliance
on each side
1
or