Zodiac MS FILTER D470, Инструкция по установке и эксплуатации

Страница: 8 / 16

7
2.2.2 Installing the multiway valve
• Insert the gasket ( ) into the threaded orifice marked "TOP" of the multiway valve. Pass a nut ( ) around the short
pipe ( ), then tighten the pipe firmly on the multiway valve to ensure sealing (see image )
.
• Place an O-ring ( ) in the groove of the upper connection of the filter. Position the valve with its short pipe by gently
tightening the nut ( ) so that the assembly can still move (see image and ).
• Place an O-ring ( ) in the groove of the lower connection of the filter. Pass a nut ( ) around the bent pipe ( ), then
position the assembly without bonding in this step (see image ).
• Gently tighten the nut ( ) and firmly tighten the nut ( ) to obtain perfect alignment between the multiway valve
and the filter (see image )
.
• Remove the nut ( ) and bent pipe ( ). Prepare and coat the smooth end of the bent/curved section of pipe
( ) with a non-toxic adhesive which is suitable for this application and the orifice marked "BOTTOM" of the multiway
valve.
• Reposition the bent pipe/nut assembly and firmly tighten the nut ( ). Allow the adhesive to dry before turning on
the filter.
: Pool suction
: Pool discharge
: Filter inlet or outlet
: Discharge to the drainage system