6
2.2 I Assembling the filter
2.2.1 Assembling the pressure gauge and air release
•
Only tighten parts by hand.
•
Screw the T-connector provided ( ) into the central orifice ( ) of the translucent cap. Use the gasket provided
( ) to seal. Do not use Teflon tape.
•
Screw the air release ( ) onto the large threaded orifice of the T-connector ( ).
Tip: installing the bleed screw
The bleed screw already contains its own seal; do not use Teflon tape to seal.
•
Screw the pressure gauge ( ) onto the small threaded orifice of the T-connector ( ).
Tip: installing the pressure gauge
Teflon tape (not included) may be required to improve the sealing of the pressure gauge on the T-connector.
: T-connector
: Bleed screw
: Pressure gauge
: Central orifice
: Gasket
EN
Содержание MS FILTER D470
Страница 15: ......