12
©2019 Guangzhou ZHIYUAN Electronics
Date: 2019/01/17
User Manual
V1.00
C
Guangzhou ZHIYUAN Electronics Co., Ltd.
ZDS2000B Series Oscilloscope User Manual
Figure 2-2 shows the real panel of ZDS2024B Plus oscilloscope.
Figure 2-2: Real Panel of ZDS
2024B Plus
Oscilloscope
Kensington lock
: The oscilloscope can be locked on a fixed position by using
Kensington lock as follows: insert the lock into the Kensington lock hole on the real
panel, turn the key clockwise to lock the instrument, and then remove the key. Please
note that do not insert any other things into the lock hole to prevent the instrument from
damage.
Notes:
Adjustable bracket: Adjust the supporting feet appropriately and use them as the bracket
to make the oscilloscope upward sloping, so as to leave the oscilloscope stableness for better
operation and observing the display screen. Open the supporting feet outward to leave the
oscilloscope sloping or close the feet inward to leave the oscilloscope upright.
Trigger output: Make the BNC female interface connected with the trigger output interface. Then
turn the knob clock wise .These two interfaces stuck means the connection is successful.
RS232 interface: This interface can be used for the serial port.
LAN interface: Make the network cable interface connected with the LAN interface.
USB Device: Make the standard B type USB serial cable connected with the USB Device interface
for use.
AC power jack: Make the power line which is complied with the provision connected with the power
interface. (See "General Precautions").
