4
©2019 Guangzhou ZHIYUAN Electronics
Date: 2019/01/17
User Manual
V1.00
C
Guangzhou ZHIYUAN Electronics Co., Ltd.
ZDS2000B Series Oscilloscope User Manual
When the instrument is switched on, do not touch the exposed connections and
components.
Avoid electric shock
Power cord should be inserted into a socket with ground protection on the wall or within
visible area. The socket cannot be used in the overcurrent situation.
When any fault occurs during the use of instrument
When there may be a fault during the use of instrument, please do not remove the
screw of the handle to prevent scratching. If the product has any problem, please stop
operating the instrument immediately and contact ZHIYUAN Electronics in time.
ZHIYUAN Electronics will send engineers to inspect, maintain and adjust it or replace
parts.
Keep instrument ventilated
Inadequate ventilation will cause instrument temperature increase, which may result in
damage to the instrument. Please inspect vent and fan constantly to keep the
instrument ventilated.
Do not use the instrument in a wet environment
In order to avoid the risk of short circuit and electric shock, do not operate the
instrument in a wet environment.
Do not use the instrument in an explosive environment
In order to avoid instrument damage or personal injury, do not operate the instrument in
an explosive environment.
Keep instrument surface clean and dry
To prevent dust or moisture in the air affecting instrument performance, please clean
and dry the surface of instrument.
Electrostatic protection
Static electricity will cause damage to the instrument. The instrument should be tested
in the anti-static area. The internal and external conductors of cables should be
connected to ground to discharge the static electricity before they are connected to the
instrument.
Transportation safety
To avoid damage to the parts (such as keys, knobs or interfaces on the panel) due to
falling of instrument during transportation, please note transportation safety.
The way to use the handle
To ensure the safety of the oscilloscope during use and handling of the oscilloscope,
please follow the method of using the handle.As shown below.
