ZP1-F Series Operation Manual
1
Introduction
This is the operation manual for the ZP1-F Series fire alarm control panels. Read
these instructions and all related documentation entirely before operating this
product.
Product range
The ZP1-F Series includes the models shown below.
Table 1: ZP1-F Series models
Model
Description
ZP1-F2
Two-zone fire alarm control panel
ZP1-F4
Four-zone fire alarm control panel with fire routing
ZP1-F8
Eight-zone fire alarm control panel with fire routing
Fire routing on the four- and eight-zone models is not available for all operating
modes. For more information, see “Sounder and fire routing delays” on page 2.
Operating modes
Supported operating modes are shown in the table below. The default operating
mode is EN 54-2.
Table 2: Operating modes
Operating mode
Region
EN 54-2 (default)
European Union
EN 54-2 Evacuation
European Union (Spain)
EN 54-2 Scandinavia
European Union (Scandinavia)
BS 5839-1
United Kingdom
NBN S 21-100
Belgium
NEN 2535
The Netherlands
The choice of operating mode used depends on your location and the specific
regional requirements of your fire alarm system.
As there is no visual indication of the active operating mode, your installation or
maintenance contractor should provide full details of your configuration.
