20
ZP1-F Series Operation Manual
Disabled sounders (or evacuation for NBN S 21-100) are indicated as follows
• General Disable LED: On steady.
• Sounder Fault/Disable/Test LED (or Evacuation Fault/Disable/Test LED for
NBN S 21-100): On steady.
To enable the sounders, press the General Disable button, and then press the
Sounder Fault/Disable/Test button (or Evacuation Fault/Disable/Test button for
NBN S 21-100) again.
Note:
Disabled sounders (or evacuation for NBN S 21-100) do not indicate a
fault or operate if there is a fire alarm.
Testing fire routing (or warning for NBN S 21-100)
Note:
Always notify the
fire brigade of any planned fire routing tests.
To test fire routing (or warning for NBN S 21-100), press the General Test button,
and then press the Fire Routing ON/ACK button (or Warning Start/Stop button for
NBN S 21-100).
The test is indicated as follows:
• General Test LED: On steady.
• Fire Routing On/Ack LED (or Warning Start/Stop LED for NBN S 21-100): On
steady yellow.
• Fire Routing On/Ack LED: Flashing red.
• Sounders: Test signal (3 seconds on, 5 seconds off)
To end the test, press the General Test button, and then press the Fire Routing
On/Ack button (or Warning Start/Stop button for NBN S 21-100) again.
If there is a fire alarm the fire panel will exit the test and respond to the alarm as
configured.
Disabling or enabling fire routing (or warning for NBN S 21-100)
To disable fire routing (or warning for NBN S 21-100), press the General Disable
button, and then press the Fire Routing On/Ack button (or Warning Start/Stop
button for NBN S 21-100).
Disabled fire routing (or warning for NBN S 21-100) is indicated as follows:
• General Disable LED: On steady.
• Fire Routing On/Ack LED (or Warning Start/Stop LED for NBN S 21-100): On
steady yellow.
To enable fire routing (or warning for NBN S 21-100), press the General Disable
button, and then press the Fire Routing ON/ACK button (or Warning Start/Stop
button for NBN S 21-100) again.
Note:
Disabled fire routing (or warning for NBN S 21-100) does not operate or
indicate a fault if there is a fire alarm.
Disabling or enabling other features
