14
ZP1-F Series Operation Manual
Acknowledging a system event and silencing the control panel buzzer
To acknowledge a system event and silence the control panel buzzer, press the
Panel Silence button.
A steady Panel Silence LED indicates that the buzzer was silenced and that all
current events are acknowledged.
Cancelling an active sounder delay (or evacuation delay for NBN S 21-100)
If a sounder delay (or evacuation delay for NBN S 21-100) is enabled and active,
press the Sounder Delay button (or Evacuation Delay button for NBN S 21-100)
to cancel the delay and activate sounders immediately.
Sounders (for EN 54-2 evacuation) and evacuation (for NBN S 21-100) can
cancel the delay and activate sounders immediately by pressing the Sounder
Start/Stop button (or evacuation Start/Stop button for NBN S 21-100).
A sounder delay (or evacuation delay for NBN S 21-100) is indicated as follows:
• Steady Sounder Delay LED (or Evacuation Delay LED for NBN S 21-100): A
delay is enabled.
• Flashing Sounder Delay LED (or Evacuation Delay LED for NBN S 21-100)
during a fire alarm: A configured delay is active (sounders are activated when
the configured delay elapses or when the delay is cancelled).
A fire alarm activated by a manual call point overrides any configured delay and
activates sounders immediately.
Cancelling an active fire routing delay (or warning delay for NBN S 21-100)
If a fire routing delay (or warning delay for NBN S 21-100) is enabled and active,
press the Fire Routing ON button (or Warning Start/Stop button for
NBN S 21-100) or the Fire Routing Delay button (or Warning Delay button for
NBN S 21-100) to cancel the delay and activate fire routing (or warning for
NBN S 21-100) immediately.
A fire routing delay (or warning delay for NBN S 21-100) is indicated as follows:
• Steady Fire Routing Delay LED (or Warning Delay LED for NBN S 21-100): A
delay is enabled.
• Flashing Fire Routing Delay LED (or Warning Delay LED for NBN S 21-100)
during a fire alarm: A configured delay is active. Fire routing (or warning for
NBN S 21-100) is activated when the configured delay elapses or when the
delay is cancelled.
A fire alarm activated by a manual call point overrides any configured delay and
activates fire routing (or warning for NBN S 21-100) immediately.
Performing a control panel LED indicator and control panel buzzer test
To perform a control panel LED indicator and buzzer test, press and hold the
Test button for more than 3 seconds.
