OPERATION
32
ZI-GPS252
•
Fit the pressure plate over the thread on the splined shaft (see Fig. 1c).
•
Fit the pressure plate cover (see Fig. 1d).
•
Now tighten the nut with the spark plug wrench anti clockwise.
NOTE:
left-hand thread (see illustration 1f).
•
The 3-section cutting blade is fitted with a plastic cover on delivery. This must be removed
before use and refitted during periods when not in use.
8.
Assemble the strimmer with cutting strimmer cord
•
Assemble/replace the strimmer as illustrated in the figure below.
•
Locate the hole in the driver disc, align it with the opposite hole and block it with the Allen key
provided.
•
Screw the strimmerol onto the thread anticlockwise.
NOTE:
left-hand thread!
13
OPERATION
Only operate the machine when it is in perfect condition. Before each operation, a visual inspection of the
machine must be carried out. Cutting elements (nylon cutter, blade, saw,...) and operating elements must
be checked carefully. Check screw connections for damage and tight fit.
13.1
Preparatory activities
13.1.1
Fuel mixture
General requirements
