802411 v3.05 09.20 HT BC Compact Instructions
Page 23 of 28
5.3
-
Boiling Calibration
Commissioning
5.4
-
Booster
•
Press the calibration button and the system will
commence the Boiling calibration procedure. This will
take approx 5-6 minutes.
•
Upon completion, a Booster reminder screen will appear
and allow you to return home by pressing the [Home]
button.
•
Check the Date and Time settings (See Note below)
To enable Booster (when installed):
NOTE:
Failing to make the correct selection for the “Booster”, will affect product performance.
NOTE:
Depending on your location you may need to re-set the internal clock. See section G of the user
guide to check and if necessary, reset the Date and Time for your time zone.
1. Press the [MENU] button for main menu.
2. Press the [Install] button.
3. Press the [Booster] button.
4. In the next screen, press YES to enable the Booster.
5. Turn the Booster ON
6. Water must be run through the Booster for a minimum of
30 seconds, before the heater will activate.
7. Dispense boiling water for 30secs and check the Booster
outlet hose is warm when the boiling water tank is replen-
ishing.
HydroTap Booster Screen
