Page 14 of 28
802411 v3.05 09.20 HT BC Compact Instructions
Section 3
Booster Heater
Mount base
horizontally
3.1
Product Description
The boost unit is a compact, electronically
controlled auxiliary water heater. It is intended to
provide pre heating of water before it enters the
Zip HydroTap G4 boiling tank. The Booster is
supplied as standard equipment with all 140 cup
models. However, it may be later installed, as an
accessory for the 100 cup models, to increase
their delivery to 140 cups.
280mm
Note
Note 1:
water connection
Blue marking: water in
Red marking: water out.
The braided hoses cannot be lengthened.
Note
Note 2:
The electrical cable length is 1.0
metre.
Note
Note 3:
Position the Booster within reach
of the fixed hose lengths, keeping the
Booster as close as possible to the Com-
mand Centre inlet/ outlet fittings.
Note
Note 4:
Ensure the Booster heater is
mounted in an upright position (as shown)
with a horizontal base.
Booster Specifications:
Rating
Unit
Nominal Power Rating
2.2
kW
Nominal Current
10
A
Electric Supply 50Hz AC
230
V
Elect flex and plug (black) - 1 metre length (with 90º Australian plug)
10
A
Fixed Flow Rate
1.2
L/min
Minimum water pressure
200
kPa
