802411 v3.05 09.20 HT BC Compact Instructions
Page 19 of 28
Installation Instructions
Hot: Left
Cold: Right
H
Note: to activate the filter, flush at least 10L of water through the filter before connecting to a softener or to a
Booster heater.
: Not required for AIO mains pressure HydroTap.
Note: The tube lengths are matched to the pump performance and therefore CANNOT be lengthened
4.4
Model: All-In-One Mains Pressure
RED
CLEAR
BLUE
BRAIDED
USB
MAINS
IN
MIXER
OUT
MIXER
IN
BOILING
OUT
BYPASS
IN
VENT BYPASS
OUT CHILLED
OUT
Note:
- Mains hose
length is 750mm
- Plug and Cord
length is 1800mm
Position the
Command Centre
close to the outlet
tap, within reach of
the hose and cord
lengths supplied
Note:
Note:
the hoses
the hoses
need to have a
need to have a
constant downward
constant downward
gradient to the
gradient to the
Hydrotap to allow all
Hydrotap to allow all
water to drain back
water to drain back
into the tanks.
into the tanks.
External HOT and COLD
isolation valves
(not supplied)
Tee piece
(supplied)
