Zip HydroTap BC100/75 Скачать руководство пользователя страница 9

802411US v1.27 06.21 BC, BC100-75 Install Instructions 

Page 9 of 32

   Technical Specifications

Models*: BC100/75 

(230V) - Classic XX

  BC100/75 

(230V) - CUBE XX

  BC100/75 

(230V) - ARC XX

  BC 

(230V) - Classic XX

  BC 

(230V) - ARC XX

  BC 

(230V) - CUBE XX

  BC 

(230V) - Wave XX

 

 

BC (110-120V) - Classic XX

 

 

BC (110-120V) - ARC XX

 

 

BC (110-120V) - CUBE XX

 

 

BC (110-120V) - Wave XX

Model:

BC100/75 (230V)

BC (230V)

BC (110-120V)

Command Center dimensions, 

WxDxH, mm (in)

336 x 476 x 335 

(13.5” x 18.5” x 13.0”)

336 x 476 x 335 

(13.5” x 18.5” x 13.0”)

336 x 476 x 335 

(13.5” x 18.5” x 13.0”)

Dry weight, kg (lb)****

24 kg (53 lb)

24 kg (53 lb)

24 kg (53 lb)

Water inlet connection

1/2” BSP

1/2” BSP

1/2” BSP

Power outlets required

1x NEMA6-15:

230V, 50/60Hz, 15A

1x NEMA6-15:

230V, 50/60Hz, 15A

1x NEMA5-15: 120V, 

50/60Hz, 15A

Power rating

9.5A (1.875kW)

at 230V, 60Hz

6.82A (1.45kW)

at 230V, 60Hz

9.12A (1.1kW) at 

110-120V, 50/60Hz

Refrigerant

R134a

R134a

R134a

NOTES:

Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection 

before or after the system. Systems certified for cyst reduction may be used on disinfected waters that 

contain filterable cysts.
* Available in a range of premium metallic finishes. XX refers to the specific finish of the faucet.
** BC - Classic XX, BC - ARC XX, BC - CUBE XX, BC100/75 - Classic XX, BC100/75 - CUBE XX and 

BC100/75 - ARC XX have been tested and certified by WQA against NSF/ANSI Standard 372 for low lead 

requirement, NSF/ANSI Standard 42 and NSF/ANSI Standard 53. This will deliver the required bacteriostatic 

effect and the reduction of aesthetic chlorine, taste, odor, nominal particulate Class I (≥ 0.5 µm to < 1 µm), 

cyst and lead as verified and substantiated by test data. See Performance Data Sheets for specific perfor-

mance claims. Certified performance claims are only valid when filter cartridge 1Z-LS (Culligan Part Number 

01034276) is used.
***BC - Classic XX, BC - ARC XX, BC - CUBE XX, BC - Wave XX, BC100/75 - Classic XX, BC100/75 - CUBE 

XX and BC100/75 - ARC XX have been certified by IAPMO R&T against NSF/ANSI Standard 372 for low lead 

requirement, NSF/ANSI Standard 42, NSF/ANSI Standard 53, CSA B483.1, ASSE 1023, and ASSE 1087. 

This will deliver the required bacteriostatic effect and the reduction of aesthetic chlorine, taste, odor, nominal 

particulate Class I (≥ 0.5 μm to < 1 μm), cyst and lead as verified and substantiated by test data. See Perfor

-

mance Data Sheets for specific performance claims. Certified performance claims are only valid when filter 

cartridge 1Z-LS (Culligan Part Number 01034276) is used. 
*** Add an extra 5 kg (11 lb) when full of water.

***

**

Содержание HydroTap BC100/75

































Отзывы: