3
Installation instructions & user manual
806143UK V1.00 July 2019 - HydroChill HC45
Technical support
Tel: 0345 6 005 005 Email: [email protected] www.zipwater.co.uk
IMPORTANT SAFETY INSTRUCTIONS
Qualifications
If the power cable is damaged it must be repaired only by a qualified technician. To avoid hazards,
all installation procedures must be carried out by a suitably qualified tradesperson. The power cable
and power outlet must be in a safe visible position for connection.
Lifting
Take care when lifting. The Command Centre may exceed safe lifting limits. If you feel this is
beyond your personal capabilities, please seek assistance with the lift. The weight of the Command
Centre is marked on the packaging. Do not lift the Command Centre by the front cover or any of its
connections. Refer to the technical specification, see page 4, for the weight of the product.
Airflow
The Zip HydroChill operates within the ambient temperature range 5ºC - 35ºC. Proper air circulation
must be provided. The system will operate satisfactorily only if the recommended air gaps are
provided. See Section 2 'Ventilation', page 9 for correct installation to prevent overheating.
Sanitising
For safe operation, the HydroChill is designed to be installed, commissioned and used within 48
hours.
Should the HydroChill not be required for an extended period of time (48 hours or more), do not fill
and commission it until ready for first use.
The HydroChill must be sanitised during the commission process, please contact
the Zip Water
team on 0345 6 005 005 to book your commissioning service.
For water taste and quality reasons any non-use of more than 48 hours, Zip recommend a system
flush be performed.
On first use after a period of non-use, run the chilled & ambient water functions for 60 seconds to
flush the filter and system.
Not flushing the system may affect water the quality.
WARNINGS AND REGULATORY INFORMATION
Warnings
•
The Zip HydroChill
must be earthed. The resistance of the earth connection
from each exposed metal part must be less than 1Ω.
• All installation and service work must be completed by trained and suitably
qualified tradespeople. Faulty operation due to unqualified persons working on
this product, or any other Zip product may void warranty coverage.
• As the installer, it is your responsibility to supply (if necessary) and install all
valves as required by local regulations and relevant standards.
• The HydroChill is rated for 230V 50Hz AC operation.
• Do not remove the cover of the appliance under any circumstances without
first isolating the appliance from the power supply.
• Never locate the Command Centre near, or clean with water jets.
• Do not expose the Zip HydroChill
to the elements of nature.
• Due to the process of continuous improvement, Zip reserves the right to
change details mentioned in this manual, without notice.
• Visit www.zipwater.co.uk to ensure you have the latest copy of this document.
!
