9
5 Product description
The product is a pressure-loaded shock absorber. It is used to brake moving masses in the end position.
INFORMATION
►
Determine the energy absorption and the impact velocity using the Product Finder on our website or see the
corresponding catalog pages.
►
Use the checklists on our website to find the right product for your application.
INFORMATION
►
Information about connecting products in parallel or series, transforming rotations or calculating lever
translations can be found in the description in the catalog.
5.1
Hydraulic fluid properties
The product is filled with a bio-oil based on synthetic ester (HEES).
• Biologically degradable
• PWIS-free
•
H1 certification for use in the food industry
•
Low vaporization inclination, which is beneficial for use in cleanroom applications.
5.2 Stroke variants
A variety of stroke variants are available for this product:
• Normal stroke (N)
• Long stroke (L)
•
Extra-long stroke (V)
5.3 Degrees of hardness
The degree of hardness describes the damping characteristics according to the impact velocity of the moving mass on the
product.
There are four defined degrees of hardness:
• Hard (H)
• Medium (M)
• Soft (S)
• Super soft (W)
The energy absorption in accordance with the technical specifications is reached in the specified speed range.
NOTICE
Material damage and malfunction in case of non-compliance
►
Please note that the product reacts with an increased counterforce if the specified speed range is exceeded.
Ö
The product can be overloaded because of this.
►
Please note that the product reacts with a reduced counterforce if the speed range falls short of the specified
value.
Ö
The product cannot achieve the full energy absorption because of this.
INSTALLATION AND OPERATING INSTRUCTIONS:
PowerStop
DDOC00335 / b
EN / 2023-08-07
Zimmer GmbH • Im Salmenkopf 5 •
77866 Rheinau, Germany •
+49 7844 9138 0 • www.zimmer-group.com
Содержание PowerStop PHE16X10LSAK-A
Страница 2: ......
