17
10 Installation
WARNING
Risk of injury due to uncontrolled movements
Risk of injury in case of unexpected movement of the machine or system into which the product is to be installed.
►
Switch off the energy supply of the machine before any work.
►
Secure the power supply against being switched on unintentionally.
►
Check the machine for any residual energy that may be present.
CAUTION
Risk of injury in case of non-compliance
►
Please note that the product has sharp edges and corners.
Ö
Contact can result in injuries.
►
Wear suitable protective equipment.
NOTICE
Installation may only be carried out by qualified personnel in accordance with these installation and operating
instructions.
►
Switch off the power supply before any assembly, installation or maintenance work.
►
Make sure that the mounting piece is sufficiently rigid.
►
Comply with the tightening torques of the mounting screws.
►
Verify the permitted load capacity of the required screw connections in accordance with VDI 2230.
►
When tightening the lock nut, adhere to the specified tightening torque with a maximum deviation of ± 10 %.
►
Please note that the angular deviation between the product and the weight to be damped must not exceed the maximum
impact angle.
INFORMATION
Further installation information:
• The lock nut is included in the scope of delivery.
•
A clamp flange can be used as an alternative for installation.
INSTALLATION AND OPERATING INSTRUCTIONS:
PowerStop
DDOC00335 / b
EN / 2023-08-07
Zimmer GmbH • Im Salmenkopf 5 •
77866 Rheinau, Germany •
+49 7844 9138 0 • www.zimmer-group.com
Содержание PowerStop PHE16X10LSAK-A
Страница 2: ......
