11
5.5 Head variants
INFORMATION
►
Please note the availability and effect of the integrated fixed stop for the different head variants.
►
For more information, refer to the "Setting the stroke and fixed stop" section.
The counter piece that impacts the product must exhibit the highest possible hardness in order to minimize wear on the
counter piece. In case of softer materials, the use of a steel or plastic head is recommended to reduce surface pressure.
For even greater durability at inclined impact angles, all heads are rounded in order to absorb the load with reduced
transverse force. For a secure hold, the heads are glued as well as crimped via lateral grooves for reliable positioning with
the piston rod.
Short piston rod no head (D)
The piston rod extends out of the housing by the maximum stroke of the
respective product. Because of this, the product has an integrated fixed
stop.
Long piston rod no head (E)
The piston rod extends further out of the housing than the maximum
stroke of the respective product. Because of this, the product does not
have an integrated fixed stop.
Steel head (S)
The steel head has an enlarged surface, thus reducing the surface
pressure during impact. The steel head is suitable for soft opposing
materials.
The distance between the housing and the bottom of the head
corresponds to the maximum stroke of the respective product. Because
of this, the product has an integrated fixed stop.
Plastic head (K)
The plastic head consists of an intake made of steel with an insert made
of a TPC material. The plastic head is suitable for soft opposing materials
and for noise reduction.
The distance between the housing and the bottom of the head
corresponds to the maximum stroke of the respective product. Because
of this, the product has an integrated fixed stop.
INSTALLATION AND OPERATING INSTRUCTIONS:
PowerStop
DDOC00335 / b
EN / 2023-08-07
Zimmer GmbH • Im Salmenkopf 5 •
77866 Rheinau, Germany •
+49 7844 9138 0 • www.zimmer-group.com
Содержание PowerStop PHE16X10LSAK-A
Страница 2: ......
