Zimmer PowerStop PHE16X10LSAK-A, Инструкция по установке и эксплуатации

Страница: 25 / 32

25
10.2.5 Installing the sensor stop sleeve (PSH)
INFORMATION
►
Please note that the sensor can only be used for products with a steel or plastic head.
►
Please note that the sensor stop sleeve cannot be used in conjunction with the bellows.
The sensor stop sleeve includes a sensor for sensing the end position of the set damping stroke.
Due to the tolerance of the switching distance, the sensor cannot be used for precise detection of the end position in terms
of position and time.
INFORMATION
An inductive sensor is integrated into the sensor stop sleeve.
• PNP
• NO = normally open
• Protection class IP65
•
PUR cable 2 m
► You can find more information in the technical data sheet on our website.
INFORMATION
The lock nut is included in the scope of delivery.
► Screw the lock nut onto the external thread
of the product.
1 2 3
►
Screw the stop sleeve onto the desired
position on the external thread of the
product.
Ö
This is done to set the end stop and the
damping stroke.
►
Counter the stop sleeve using the lock nut.
►
Place the tool on the wrench flats.
1
Lock nut
2
Wrench flats
3
Sensor stop sleeve
INSTALLATION AND OPERATING INSTRUCTIONS: PowerStop
DDOC00335 / b
EN / 2023-08-07
Zimmer GmbH • Im Salmenkopf 5 •

77866 Rheinau, Germany •

+49 7844 9138 0 • www.zimmer-group.com