26
10.2.6 Installing the side load adapter (PBV)
NOTICE
Malfunction in case of non-compliance
If the product is equipped with both the side load adapter and protection, this can lead to worsened return
behavior.
►
Select the No protection (D) product variant, if using a side load adapter.
NOTICE
Non-compliance may result in material damage.
The side load adapter can only be used in combination with the Short piston rod no head (D) product variant.
INFORMATION
The lock nut is not included in the scope of delivery.
►
Use a side load adapter if the product is operated with a higher impact angle than the permitted misalignment.
Ö
This increases the permitted impact angle up to 30°.
►
For more information, refer to the "Impact angle and side load adapter" section.
The side load adapter consists of the pin, pin guide and optional protection.
►
Screw the side load adapter onto the
external thread of the product up to the
fixed stop.
3
1
2
4
►
Mount the side load adapter to the product
via the wrench flats and hexagon.
• The tightening torque of the side load
adapter is based on the associated lock nut.
►
Screw in the assembly using the external
thread of the product or the side load
adapter.
►
Secure the assembly using the lock nut on
the product or the side load adapter lock
nut on the mounting piece.
1
Hexagon key
2
Side load adapter
3
Lock nut
4
Wrench flats
Zimmer GmbH • Im Salmenkopf 5 •
77866 Rheinau, Germany •
+49 7844 9138 0 • www.zimmer-group.com
INSTALLATION AND OPERATING INSTRUCTIONS:
PowerStop
DDOC00335 / b
EN / 2023-08-07
Содержание PowerStop PHE16X10LSAK-A
Страница 2: ......
