10
DDOC00270 / f
EN / 2020-03-31
Zimmer GmbH
●
Im Salmenkopf 5
●
77866 Rheinau, Germany
●
+49 7844 9138 0
●
+49 7844 9138 80
●
www.zimmer-group.com
INSTALLATION AND OPERATING INSTRUCTIONS:
2-jaw angular grippers, electric/pneumatic, HRC-05 series
6.3
Verified configuration
INFORMATION:
For information about the verified configuration, please visit our website.
Zimmer Customer Service is available to provide you with assistance if you have any further questions.
6.4 Protection classes
NOTICE:
The gripper achieves protection class IP40 in all mounted positions of installation.
6.5 Technical data
INFORMATION:
For information on technical data, please visit our website.
This data varies within the series, depending on the specific design.
Zimmer Customer Service is available to provide you with assistance if you have any further questions.
7. Installation
7.1 Safety notes
NOTICE:
Switch off the energy supply for the electronics before any assembly, installation or maintenance work.
►
Electronics may get damaged.
CAUTION:
Switch off the energy supply for the electronics before any assembly, installation or maintenance work.
►
Injuries are possible.
WARNING:
Risk of injury in case of unexpected movement of the machine or system into which the gripper is to be
installed.
►
Switch off the power supply to the machine before all work.
►
Secure the machine against being switched on unintentionally.
►
Check the machine for any residual energy.
7.2 Installing the mechanical system
7.2.1 General installation information
NOTICE:
LED ring must be perfectly flush with each other before tightening the grub screws (“IO-Link”).
Non-compliance may result in material damage.
