BlackKite, Vehicle Tracking System User Manual
Rev. 1.4.0
Zilogic Systems
Page 28
5.1.5. Configure the Device Parameters
Connect the device to the PC, using the USB cable. Start the Device Configurator application, and
configure the User Authorization, and the GPRS APN parameters. Refer section Section 4.1, “User
Authorization” and Section 4.3.1, “On-line via GPRS” for more details.
5.1.6. Testing Device Functionality
Allow the system about 5 min to boot up. Send the SMS Command
VERSION
to the phone no.,
corresponding to the device. You should receive the device version as response.
The device is configured by default to send data to a demo server. Go to http://bkdemo.zilogic.com/
and enter your device IMEI no. The data from the device should be visible on the web page.
5.2. Vehicle Installation
Please ensure that the device is configured as required before installing it on the vehicle. The pro-
cedure for installation is provided below.
5.2.1. Mounting the Device
The device has to be screwed in place at an appropriate location in the vehicle as show in the
following picture. The top side of the device has to face skyward, for proper GPS and GPRS signal
reception.
5.2.2. Powering the Device
Connect the wire harness to the device. Connect the power input of the device, to the vehicle bat-
tery.
