BlackKite, Vehicle Tracking System User Manual
Rev. 1.4.0
Zilogic Systems
Page 23
1. Send
ADD SMSALERT IGN
, to enable SMS alert for ignition state change.
2. Send
ADD GPRSALERT IGN
, to enable GPRS alert for ignition state change.
3. Send
SAVE
for the changes to take effect.
4.5.7. Over Speed
BlackKite-Fleet is built with over speed monitoring feature, which continuously monitors the vehicle
and triggers alerts when the speed exceeds the set threshold.
SMS alerts: When enabled, the device sends out over speeding alert message to the authorized
users. The alert message will be sent every 2 min until the vehicle speed drops below the set thresh-
old.
GPRS Alerts: When enabled, the device sends out additional GPRS packets whenever the vehicle
exceeds the threshold value and when vehicle drops below the set threshold value.
To enable over speed monitoring, the user needs to set the threshold. The default threshold is
60 Kmph. The device can be configured to generate both SMS and GPRS alerts when the vehicle
exceeds the threshold value.
Let’s assume a scenario in which the user wants to be notified when the vehicle speed exceeds 70
kmph. The alerts can be enabled through the Configurator GUI or through commands as shown
below.
4.5.7.1. Configuration through GUI
1. Click
Alerts
button on the
Configuration
menu.
