BlackKite, Vehicle Tracking System User Manual
Rev. 1.4.0
Zilogic Systems
Page 21
2. Send
SAVE
for the changes to take effect.
4.5.3. Digital IO alerts
The device continuously monitors the input and outputs and sends alerts when there is a state
change from low-to-high or high-to-low. User can enable or disable alert notification for each IO.
SMS Alert: When enabled, the device notifies the status change of the specific digital input / output
to the authorized users.
GPRS Alert: When enabled, the device sends out additional GPRS packet to the server, when there
is a state change.
Let’s assume a scenario in which,
1. The user would like to get SMS alerts and GPRS alerts for any change in the door sensor
connected to digital input 1.
2. The user would like to disable SMS alerts and GPRS alerts for any change in the digital output
2.
The alerts can be enabled / disabled through the Configurator GUI or through commands as shown
below.
4.5.4. Configuration through GUI
1. Click
Alerts
button on the
Configuration
menu.
2. Select
Digital Input 1
checkbox under SMS and GPRS alerts, to enable them.
3. Deselect
Digital Output 2
checkbox under SMS and GPRS alerts, to disable them.
4.5.4.1. Configuring through Commands
The command sequence is provided below:
