Z8 Encore! XP F042A 8-Pin Development Kit
Quick Start Guide
QS005506-0111
Page 6 of 15
For 32-bit Vista systems:
<ZDS II Installation Directory>\device drivers\USB\x32
<ZDS II Installation CD>\device drivers\USB\x32
For 64-bit Vista systems:
<ZDS II Installation Directory>\device drivers\USB\x64
<ZDS II Installation CD>\device drivers\USB\x64
6. Click
Next
.The
Windows Security
dialog box appears.
7. Select
Install this driver software anyway
.
8. When the software has been installed successfully, click
Close
.
Windows XP
Observe the following steps to install the USB Smart Cable on a Windows XP system.
1. Connect the Zilog USB device to the Host PC. The
Found New Hardware
Wizard
should activate automatically after connecting the Zilog USB device for the first time;
select
No, not at this time
if asked to connect to Windows Update.
2. Select
Install from a list or specific location (Advanced)
; then click
Next
.
If the Windows Logo testing dialog appears, select
Continue Anyway
.
3. Select
Search for the best driver in these locations
and
Include this location in
search:
.
4. Browse to the following driver directory and click
Next
.
<ZDS installation>\device drivers\USB\x32
5. Upon finding the appropriate driver, click
Next
.
6. Click
Finish
to complete the installation.
Windows 2000
Observe the following steps to install the USB Smart Cable on a Windows 2000 system.
1. Connect the Zilog USB device to the Host PC. The
Found New Hardware
Wizard
should activate automatically after connecting the Zilog USB device for the first time.
Note:
