Z8 Encore! XP F042A 8-Pin Development Kit
Quick Start Guide
QS005506-0111
Page 14 of 15
•
Open the HyperTerminal application (located in your Windows Accessories program
group) and connect a DB9-to-DB9 cable between your host PC and console port P2 of
the development board. Set the communication settings in HyperTerminal to 57600
baud, 8 bits, no parity and one stop bit. These settings are also noted in the
main.c
file.
•
Click the
Go
button. The Red and Yellow LEDs should blink in sequence.
HyperTerminal should display the
LED Lights...
message.
If the demo code still does not run, contact Zilog Technical Support at
support.zilog.com
.
