9
All information contained herein is the exclusive copyright of Round Bank Engineering Ltd and is not to by copied,
duplicated or otherwise distributed without the express permission of Round Bank Engineering Ltd, Unit 7, Victoria
Business Park, Halifax, UK, HX1 5ND - +44 (0) 1422 647177
–
Using ZDA010 software to set parameters
Getting Started / Setup
Open the .exe file from Zikodrive. Depending on your security settings you may be asked to verify
that the “.exe” file has come from a verified source. You
will need to approve this with your security
system. Once open you should see a screen as below.
When first opened, the ZDA will be blank. Y
ou will need to open the initial “.ini”
(Config) with the
settings of the required motor/pump/application created by Zikodrive. To do this, Click File > Load
Config and then locate the file location where the .ini file was saved (see below).
