10
All information contained herein is the exclusive copyright of Round Bank Engineering Ltd and is not to by copied,
duplicated or otherwise distributed without the express permission of Round Bank Engineering Ltd, Unit 7, Victoria
Business Park, Halifax, UK, HX1 5ND - +44 (0) 1422 647177
–
Port Setup
On the main menu at the top of the page, select “COM” and then “Settings”.
You should then get the screen below. Ensure the settings are as below (with the exception of the
COM port which will vary depending on which port you have used on your device).
The first time the .ini (Config) file is loaded, it will attempt to open the COM Port number that was
previously saved in the .ini file. Please note that this may be incorrect when first using the software.
It is nonetheless a simple change to make. Simply close the COM port
by selecting “COM” and
“Close”. Then open the “Settings” option, change the COM port to the correct one and
then select
“COM” and “Open”.
NOTE: every time you wish to change COM port, you must ensure you close the COM port, change
it, then Open the correct one.
