ZGR SWIT NG
Operation manual
www.zigor.com
12
Timing
on
off
5 seg 5 seg
module over-temperature.
Timing
on
off
0 seg 0 seg
•
Battery leak to ground (OPTIONAL): if there is a ground connection of more than 4 mA.
Timing
on
off
5 seg 1 seg
•
Maximum output voltage: stays off while the output voltage is within the established limits. The red LED
comes on when the maximum level is reached (provided that the battery is charged and connected),
moreover the unit will stop.
Timing
on
off
0 seg 1 seg
•
Next battery end of discharge: This can be considered to be a safety warning. It turns on when the battery
voltage comes near the end of discharge stop value. Once the end of discharge stop value is reached, the
battery cut-off will shut off the load voltage supply. When the mains supply returns, the cut-off will close,
providing output again, in addition to charging the battery.
Timing
on
off
5 seg 0 seg
•
Mains presence OK: (green) Comes on while the mains voltage is within the established limits (230V+-15%).
This will turn off when the limits are exceeded or when there is no input voltage.
Timing
on
off
10 seg seg
The
ZGR SWIT NG panel includes another LED, which indicates that the power module is operating (green LED
on when we press the on button and the module begins to operate).
