STW164IP
12660-0710-00
Page
22 / 30
www.ziehl.de
10.6.7 Network
Basic knowledge of network engineering is required for network configuration.
On the device, Menu
/ Network
In the web browser,
Register Network, Network
settings
Parameter, description
Not possible.
Network Settings / Host
name
Name in the network
DHCP
on / off
Network settings / DHCP
on / off
on: If a DHCP server is available on the network, the
device can automatically obtain the network configuration.
off: The network configuration must be entered manually
(see below)
IP address
Network settings / IP
address
If DHCP = on: no input required
If DHCP = off: Enter a valid IP address
Subnet mask
Network settings / subnet
mask
If DHCP = on: no input required If DHCP = off: Enter a
matching subnet mask
Not possible.
Network settings / Gateway DHCP = on: no input required
DHCP = off: Enter the IP address of the gateway in the
network
Not possible.
Network settings / DNS
server
DHCP = on: no input required
DHCP = off: Enter the IP address of the DNS server on
the network
Not possible.
Time server settings and
Time zone settings
Settings for date/time (for error memory). In the event of
operation without a time server, the date/time will not be
stored in the event of a power failure. It then restarts on
01.01.2018 / 12:00:00 (+UTC time shift)
10.6.8 Settings
On the device, Menu
/ Settings
In the web browser,
Register system,
Parameter, description
Language
German / English
Display language
German /
English
Language on the device
Qty. Interval
0.1,2.0s
Display interval
0.1,2.0s
Interval at which measured values are updated on the
device display
Brightness
20,100%
Brightness
20,100%
Brightness of the display is reduced after dimming time
without
Dimming
time
00:00:10.....01:00:00
hh:mm:ss
Dimming time
10....3600s
pressing a button.
Code lock
on / off + pin
Code lock
on / off + pin code
Code lock to protect the device against unauthorized
changes (protection against misalignment on the device).
Set code lock on the device (with joystick button): Select
menu item -> code lock on/off -> enter old code (factory
setting 504) -> enter new code (only if code lock on)
Factory setting
yes /
no
Set factory reset
Reset device to factory default
