STW164IP
12660-0710-00
Page
17 / 30
www.ziehl.de
10.5.2 Display page, filter cleaning
During cleaning, display page 1 changes and shows the process (does not apply to compressed air cleaning).
Cleaning:
On in:
Intervals:
Vibration time/Break
Continuous vibration:
Filter cleaning is active
Cleaning process starts after this time has elapsed
Number of vibration intervals remaining time:
Displays the time that is currently elapsing
Continuous vibration takes place after the vibration intervals
(display of remaining time)
Discharge:
Status of the discharge (on/off)
10.5.3 Menu pages
Main Menu
Call up the main menu:
Exit main menu:
Call up submenu:
Navigate within the main menu:
Press
↓
for 2s
Press ←
(back to the display pages)
•
Press →
•
Down, press
↓
•
Up, press
↑
Submenu
Call up submenu:
Exit submenu:
Call up parameter menu:
Navigate within the submenu:
From the main menu, select the
submenu and press →
Press ←
(back to the main menu)
•
Press →
•
Down, press ↓
•
Up, press ↑
Parameter menu (value setting)
Call up parameter menu:
Navigate in the
parameter menu:
Change value:
Exit parameter menu:
From the submenu, select the
parameters and press
→
•
Position to the left, press ←,
•
Position to the right, press
→
,
•
Increase value, press
↑
•
Decrease value, press
↓
Press right
→
(several times) until the
green tick is activated. Using the
↓
/
↑
keys, select the
X
(discard change)
or the
tick
(save changes) and leave
by pressing →
Cleaning
on in
Discharge
Cleaning
intervals
Vibration time
Discharge
Cleaning
Inte
Continuous
Vibrations
Discharge
Machines
Extraction
Cleaning
Discharge Relay
Analogue
Output
Delay on
