Ziegler CORN CHAMPION GEN III, Руководство по эксплуатации

Страница: 51 / 58

FAULTS AND TROUBLESHOOTING
51
FAULTS AND TROUBLESHOOTING
HYDRAULICS
Fault Cause Remedy Page
Cornheader front at-
tachment Insufficient quantities of hy-
draulic oil Refill oil 38
Insufficient lift force Additional lift cylinder required 18
Hydraulic function of
the picker does not
function Hydraulic connections have
no throughflow Check the connections / couplings /
screw connections 21
Insufficient pressure of the
hydraulic system Check the pressure, increase if per-
missible CH
hand-
book
Insufficient quantities of hy-
draulic oil Refill oil 38
DRIVE
Fault Cause Remedy Page
Drive is activated but
the picker does not ro-
tate Drive shaft Check the drive shaft 20
The drive shaft coupler
does not engage Locking impossible, check the cou-
pling halves for full engagement 20
The coupling does not en-
gage Check the alignment, make the shifter
piece passable 21
The picker remains
stationary during op-
eration The V-belt is not tightened Check the drive CH
hand-
book
Overload Adapt the working speed
CROSS AUGER
Fault Cause Remedy Page
Cross auger remains
stationary Overload Reduce the material quantity straw
content too high
Friction coupling engages Remove foreign objects, check the
scraper 29
Drive Check the chain and coupling 28
Original combine harvester,
splash guard fitted in front
of the feeder channel Remove the splash guard
Auger ejects corn cob
from the machine Position and number of
conveyor plates Alter to fit the conditions
Insufficient feed rate Increase the feed