![background image](http://html1.mh-extra.com/html/ziatech-corporation/zt-8903/zt-8903_hardware-user-manual_933068021.webp)
2. Getting Started
21
J3
J2
J1
J4
J6
J5
J2 (FRONTPLANE INTERRUPT)
J3 (AC POWER FAIL)
J5 (MEMORY EXPANSION)
J6 (LOCAL BUS)
J4 (PARALLEL I/O)
J1 (SERIAL/PRINTER I/O)
P/E (STD 32 INTERFACE)
J7 (POWER CONNECTOR)
Connector Locations
JUMPER DESCRIPTIONS
The ZT 8904 includes several jumper options that tailor the operation of the board to
specific application requirements. These options are summarized in Appendix A,
"
Jumper Configurations
."
SETUP
The following topics present a brief introduction to the setup and configuration of the
ZT 8904. For documentation specific to the BIOS and other utilities, see the
Ziatech
Industrial BIOS manual (shipped with Ziatech Development Systems).
System Configuration Overview
The Ziatech Industrial BIOS and MS-DOS operating system software is preprogrammed
in the ZT 8904's on-board flash memory. The BIOS includes embedded support to allow
the ZT 8904 flash memory to be used as a solid-state drive (SSD) in the MS-DOS
environment. Ziatech also supplies SSD support for QNX (contact Ziatech for SSD
drivers for other operating systems).