CA103&CA102S Handy Multi-functions Calibrator Operating Instruction
16
①
By cursor left and right arrow keys to select the location,
modify the value by this bit up and down keys;
②
Enter the value directly by numeric keys, you have entered a
cursor automatically after a decimal point to the right place automatically
skip to the end automatically jump start bit (All of the following numeric
input can be modified by these two methods to achieve ).
4.3 Source DC Voltage (DCV) Signals
1 Connect the terminals Figure 4.1.
2 Use the FUNCTION key on the SOURCE ,when the output interface
is marked as DCV, this time to display DC voltage signal output range (Ran
0-6V), in the additional information column corresponds to the percentage
of the current output value 1 ~ 5V display, When data is beyond the
range, % will not display. When the output error exceeds "output error"
parameter settings, display "error"
3 Use the Direction keys or numeric keys to set the output value. Press
the Zero key, return to the initial value is set to "0."
4.4 Source DC Current (DCmV) Signals
4.4.1 Source DC Current Signals
1 Connect the terminals Figure 4.1.
2 Use the FUNCTION key on the SOURCE ,when the output interface
is marked as DCmV, this time to display DC current signal output range
(Ran 0-24mA), in the additional information column corresponds to the
percentage of the current output value 4-24mA display,
When data is
beyond the range, % will not display.
when the output error exceeds
"output error" parameter settings Or output terminal becomes open, display
"error"
3. Use the Direction keys or numeric keys to set the output value. Press
the Zero key, return to the initial value is set to "0."
http://www.zhoyi.com
