CA103&CA102S Handy Multi-functions Calibrator Operating Instruction
25
beginning measurement.
• It may take a while for the temperature of the terminal parts to stabilize
after a terminal adapter is attached or a thermocouple is connected.
• The cold junction compensation temperature settings refer to "6
parameter settings"
5.6 Measuring Frequency (FREQ)
1 Connect the terminals as shown in the figure above.
2 Use the Measure key on the Fun, when the output interface is
marked as FREQ. FREQ measurement range is displayed (Ran 0-5KHz).
3 The measurement value and unit (Hz) appear.
6. Parameters setting
In operation, some of the parameters can be viewed and modified. For
example, the input and output temperature compensation, contrast, screen
saver, Auto Power Off and other settings.
1 In the main screen, Press ENT will go into parameter setting, ESC
will be back to main screen. The parameters as shown in below:
In Comp
Auto
Out Comp
00.0
℃
Comp Temp
Comp Temp
Auto
00.0
℃
http://www.zhoyi.com
