background image

ZGR TOWER PRO 1   3 KVA 

 

 

Operation manual 

www.zigor.com 

32

 

 

 

Battery maintenance  

 

 

Placing  the  batteries  correctly  so  that  all  their  elements  can  be  easily  reached  facilitates  maintenance. 
Maintenance consists of checking the following aspects: 

 

Cleanliness:  The  elements,  their  connections  and  supports  must  be  kept  clean  and  dry.  It  is 
recommended to protect the terminals and metal connections with diluted vaseline. Do not use cleaning 
products containing solvents and/or harmful substances for cleaning elements with plastic containers. 

 

Connections  and  terminals:  Check  the  tightness  of  nuts  on  the  poles  of  elements  as  well  as  the 
tightness of the electrical connection with at regular intervals of approximately 12 months. 

 

Checking voltages: Check the voltages of elements in order to detect any possible anomalies in these. 

 

 

 

Periodic  Discharges:  If,  due  to  use,  the  batteries  do  not  support systematic  charging  and  discharging 
operations,  the  following  indications  must  be  applied.  In  order  to  maintain  the  properties  of  the  active 
material that makes up the battery, the battery must be discharged periodically (it is recommended that 
this be done every six months). Periodic discharges provide an indication of autonomous operation, allow 
you  to  detect  faulty  elements  and  discover  symptoms  of  premature  ageing.  It  is  not  necessary  to 
discharge the battery completely as this might  involve a risk of disconnecting the output as the  battery 
does not have its complete capacity. After these intentional discharges,  leave the system on for at least 
24 hours in order to recharge the battery completely. 

Do  not  smoke,  light  a  fire  or  generate  sparks  near  batteries  during  recharging  as  there  is  a  risk  of  fire  and/or 
explosion. 

For cleaning, do not use synthetic material clothes or sponges. Keep batteries clean and dry at all times. Protect 
them against dirt, dust, metal shavings, etc. 

 

 

 

 

Efficient maintenance lengthens the service life of batteries and ensures that the unit operates correctly. 

 WARNING 

Electrolyte is highly corrosive. In the case of any contact with the skin, remove stained clothing and wash with 
abundant  water  those  parts  of  the  skin  affected.  The  case  of  any  problem,  see  a  doctor.  The  case  of  any 
contact with one's eyes, rinse with a great deal of water for 10 to 15 minutes and see an ophthalmologist. 

 

 WARNING 

If the ZGR TOWER PRO 1   3 KVA is to remain disconnected or shut down during a period of one month or 
more, the battery switch or protection fuse must be disconnected (if available). The equipment must be kept in a 
place that is cool and dry. 

Содержание TOWER PRO 1 kVA







































Отзывы: