background image

ZGR TOWER PRO 1   3 KVA 

 

 

Operation manual 

www.zigor.com 

37

 

 

10

 

WARRANTY 

Unless otherwise agreed, ZIGOR guarantees that ZGR TOWER PRO 1   3 KVA units leave the factory in perfect 
working  order  and  free  of  any  defects  for  a  period  of  24  months  to  be  counted  as  of  the  date  of  sale  of  the 
apparatus, shown in the delivery note and/or invoice.  

ZIGOR  will  guarantee  to  the  Buyer,  the  proper  functioning  against manufacturing  and/or  workmanship  defects. 
This Warranty includes, whenever the circumstances of good use on the equipment, replace, repair (workmanship 
included) or refund the purchase price as paid by the customer within the above specified period according to the 
type of defect and are only and exclusive remedies guaranteed under this Limited Warranty. 

The replacement of spare parts, if required, will be made with other new or repaired parts and the replaced ones 
will become property of ZIGOR.  

U
be held responsible for it. 

The  customer  will  be  free  of  charge  provided  the  cause  of  equipment  failure  due  to  defective  material  thereof, 
without  being  affected  by  the  exclusion  of  warranty  causes  described  in  the  next  section.  In  any  other 
circumstances be charged the amount of economic displacement. 

The following situations will cancel the guarantee of the product: 

 

Faults due to  improper handling of the product, according to the operating instructions, misuse, default 
grid or by storm. 

 

Improper  use  of  the  equipment  according  to  the  Operating  Manual  and  without  respecting  the  original 
characteristics of the equipment. 

 

Installation  in  a  place/  environment  that  does  not  meet  the  requirements  indicated  in  the  Operating 
Manual referring to the Installation Conditions. 

 

When  the  customer  not  clearly  proves  the  systematic  realization  of  regular  maintenance  operations 
described in the Operating Manual. 

 

Equipment deterioration due to external agents (water, dirt, animals, etc.) 

 

Damages caused by accident, theft, fire, inadmissible atmospheric conditions, external agents (animals, 
insects, etc.) or natural disasters. 

 

In case of any intervention and/or repair by an unauthorised Technical Service. 

 

The  use  of  equipment  or  accessories,  not  sell  and/or  installed  by  ZIGOR  or  their  Authorised  Technical 
Service. 

 

Environmental Operating Conditions out of range. 

When the unit is equipped with lead-acid batteries, it must be considered the following precautions: 

Those  elements  are  fully  charged  before  shipment.  They  can  be  stored  for  up  2  years  provided  that  they  are 
charged at minimum intervals of 6 months during their storage. 

 

The Spanish Standardisation and Certification Association (AENOR) certifies 

adopted  by  ZIGOR  CORPORACIÓN,  S.A.  for  the  design,  development, 
production  and  after  sales  service  for  electronic  equipment  for  the 
conversion of direct and alternating current as well as electronic projections, 
communications  systems,  telemanagement  applications  and  electrical  and 
electronic  turnkey  projects,  is  an  agreement  with  the  requirements  of  the 
Spanish Standards UNE-EN ISO 9001:2015 and UNE-EN ISO 14001:2015 
respectively

 

 

 

The installation of elements inside the unit by personnel other than those authorised by ZIGOR, shall render the 
warranty  null  and  void.  ZIGOR  will  not  accept  responsibility  for  the  repair  of  equipment  if  any  of  the  seals 
installed for internal checks is broken. 
The validity of this guarantee is limited to the proper use of the equipment according to the Operating Manual 
and while respected the original characteristics of the equipment. 

Содержание TOWER PRO 1 kVA







































Отзывы: