ZGR TOWER PRO 1 kVA, Руководство по эксплуатации, Страница: 20 / 38

ZGR TOWER PRO 1 3 KVA
Operation manual www.zigor.com
20
4.1.4 Pushbutton functions
Buttons are located in the front in the UPS under the display, as you can see in Fig. 4-1.
In the table below is defined the meaning and the button functions:
BUTTON FUNCTION
ENTER/ON
• Start the UPS: Press and hold this button for at least 2 seconds to turn on the UPS.
•
Carry out battery test: Press and hold this button for 2 seconds to carry out a battery test
while in normal mode or frequency converter mode.
• Mute the alarm: When the UPS is on battery mode, press and hold this button for at least 2
seconds to disable or
of warnings or faults.
• Setting menu: Press this button to confirm current setting.
ESC/OFF
•
Stop the UPS: Press and hold this button at least 2 seconds to turn off the UPS. Factory-
made, it will transfer to bypass mode. If transferring to standby mode is desired, set
parameter 10 in setting menu.
•
Setting menu: Press this button to exit setting menu without saving changes or to cancel a
setting.
UP
•
Up button: Press this button to
section.
•
Setting menu: Press this button to go back to previous parameter or to change the value
of the parameter.
DOWN
•
Down button: Press this button to advance to next
section.
• Setting menu: Press this button to advance to next parameter or to change the value of
the parameter.
UP + DOWN •
Setting menu: Press and hold both buttons at least 5 seconds to access setting menu.
Table 4-5 Pushbutton functions
4.1.5 UPS setting menu
Certain UPS parameters can be configured in the setting menu.
To enter this menu and navigate through it, follow these steps:
•
After the UPS is powered buttons for at least 5 seconds to enter setting
menu.
•
•
will start flashing.
•
•
•
seconds.
screen.