ZETRON 360 Скачать руководство пользователя страница 62 | Manualshive

Страница: 62 / 77

background image

Operation

62

025-9459E

If controlled by the handset, when the handset is removed from its cradle, the radio is
taken off-hook, and when the handset is replaced, the radio is placed back on-hook.

Pressing a function key programmed for radio hookswitch will toggle the radio between
on-hook and off-hook. The LED next to the key will turn on while the radio is off-hook
and turn off while the radio is on-hook.

Either method can be used by itself, or both methods can be used together. They are
configured in system programming.

Off-hook Speaker Revert & Off-hook Speaker Mute

Off-Hook Speaker Revert determines whether the front panel speaker is muted or
unmuted when the handset is removed from its cradle.

In addition, any programmable function key can be set to Off-Hook Speaker Mute.
Pressing this key while the handset is on-hook will have no effect. Pressing it while the
handset is off-hook and the front panel speaker is unmuted will mute the front panel
speaker and turn on the LED next to this key. Pressing the Off-Hook Speaker Mute key
while the handset is off-hook and the front panel speaker is muted, however, will unmute
the front panel speaker and turn off the LED next to this key.

These features are configured in system programming.

Adjacent Deskset Muting

When two or more remotes are located in the same room or within earshot of one
another, audio feedback can be a problem. When one user transmits, the audio will be
heard at the other remote and can cause feedback. To prevent this, each remote can be
individually configured to mute its front panel speaker while another remote is
transmitting over the air.

For more information on enabling this option, see the Installation section.

Transmit Time out Timer

As a safety feature, the remote system has a transmit time-out timer that can be set from 2
to 255 seconds, or can be disabled. If a user transmits for longer than the set period, the
radio will be unkeyed, and the TX LED on the remote will turn off to indicate the radio is
no longer transmitting.

The transmit time-out timer is configured in system programming.

«
...
60
61
62
63
64
...
»

Содержание 360














































































Отзывы:

Нет отзывов

Похожие инструкции для 360

Бренд: zipwake Страницы: 12

Бренд: Watts Страницы: 2

Бренд: jbc Страницы: 12

Бренд: Eaton Страницы: 16

Бренд: Panasonic Страницы: 15

Бренд: Panasonic Страницы: 42

Бренд: Gardena Страницы: 14

Бренд: Gardena Страницы: 4

Бренд: Rain Bird Страницы: 24

ESP-LXIVM Series

Бренд: Rain Bird Страницы: 16

Бренд: Rabe Страницы: 61

Бренд: Racal Instruments Страницы: 35

Бренд: Radionics Страницы: 14

Бренд: Dakota Digital Страницы: 12

Бренд: Anilam Страницы: 31

Бренд: Rinnai Страницы: 7

Бренд: Bettis Страницы: 18

Бренд: EisSound Страницы: 10

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды