Radio Programming
23
Note
Due to differences in various versions of the radio programming
software, some settings may have slightly different names and
may be located in different windows or tabs than those shown
here. The specific software shown here is “KPG111D” v2.10.
To configure a NX-800 radio for basic settings:
1.
From the
Edit
menu, select
Optional Features
and
Optional Features 1
. On the
Common Page 1
tab, mark the
Off-hook Decode
check box.
Off-hook Decode causes the transceiver to open the squelch for valid channel
activity regardless of the Mic Hook On/Off status. This is important if using QT
(CTCSS) or DT (DCS); otherwise the radio would not unsquelch if a signal was
present and the hand microphone was removed or not grounded in its hanger.
2.
Go to the
Common Page 3
tab of the Optional Features 1 configuration window:
a.
Set the function assignment for
COM Port 0
and
COM Port 1
to
None
.
b.
Assign
COM Port 2
to
Data
,
Normal
polarity,
2 stop bits
and a Baud rate
of
9600
.
c.
Set
PC Interface Protocol
to
Version 1
.
The Model 360 connects to COM Port 2 via the DB-25 connector on the back of
the radio.
Details regarding the use and interaction of the port settings for COM 0, 1, and 2
are discussed in the radio’s programming manual and can be accessed by clicking
Help.
Содержание 360
