ZETRON 360 Скачать руководство пользователя страница 50 | Manualshive

Страница: 50 / 77

background image

Programming

50

025-9459E

On Hook Exits Privacy

This command

Enables

or

Disables

any remote from exiting privacy mode whenever its

handset is returned to the cradle.

Line Check

The Line Check command

Enables

or

Disables

the remotes from detecting a problem

with their data links to the radio interface. If this feature is enabled, and a remote is
unable to contact the radio interface for three minutes, it will display “No Radio Found”
in the bottom line of its LCD until the data link is restored.

Local Text Aliases

This command

Enables

or

Disables

the display of the text aliases programmed into the

radio interface. If this feature is enabled, each remote will display the text alias assigned
to the current group in radio interface programming and will not display certain radio
messages, such as Key lock, OST and Redial strings. If this feature is disabled, each
remote will display the text alias assigned to the current group in radio programming
along with the other radio display messages.

TX Time-out

This command sets the transmit time-out time. This parameter is the number of seconds
that a remote can continually key the radio before the radio interface will cancel transmit.
This can be set from 2 to 255 seconds in increments of 1 second. The feature can also be
disabled entirely by entering zero. The default is

55

seconds.

Note

For safety and reliability reasons, it is strongly recommended
that the transmit time-out time in the radio interface be set
shorter than the transmit time-out time in the radio, and that it

not be disabled.

Function keys and Keypad keys

The features listed in this section can be assigned to function keys and/or keypad keys.
Radio features are listed first, followed by remote features. To leave a key unused, assign
it the

None

function.

Radio Features

The radio features that can be assigned to keys are:

«
...
48
49
50
51
52
...
»

Содержание 360














































































Отзывы:

Нет отзывов

Похожие инструкции для 360

Бренд: Lawler Страницы: 4

Бренд: Wavetec Страницы: 17

Бренд: Calsense Страницы: 9

Smart Controller

Бренд: MaestroHome Страницы: 10

Бренд: Warren Controls Страницы: 16

Бренд: Taie Страницы: 28

Бренд: GARAN Страницы: 8

Бренд: Gamma Vacuum Страницы: 25

Бренд: Gamma Страницы: 28

Бренд: IDK Страницы: 96

Бренд: Samson Страницы: 6

TruPortal TP-ADD-1DIP

Бренд: Interlogix Страницы: 9

Бренд: Fox Страницы: 5

Бренд: Climatisation Страницы: 52

Бренд: TECOM Страницы: 8

Бренд: SMC Networks Страницы: 10

Бренд: e-survey Страницы: 12

Бренд: Dataq Страницы: 26

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды